|
Polaris Ranger XP HD EV RZR RZRS RZR4 Crew, Yamaha Rhino, Kawasaki Mule Teryx, Arctic Cat Prowler
|
|
|
|
|
|
|
Customer Reviews
Testimonials and Pictures
|
|
If you have purchased any of our kits or accessories, please take some pictures and send them along with your thoughts to Cisco@LEDTSK.com and I will post them here on the website. Many of you out there are so talented and have really done a great job on your kit installations.
Thanks to all of our customers for their kind words, the pictures of their recreational vehicle, their helpful feedback and especially their time and support!
|
|
Check out what our customers are saying about our turn signal kits and accessories.
(click on pictures to enlarge)
|
|
|
|
|
|
Arctic Cat Prowler Turn Signal Kits
|
|
|
Johnny from Tucson wrote: "I just wanted to say that these LED turn signals are great! I have received several comments about them and asked where I purchased them. I live in an area where UTV's are common and these signals make it safer when I travel and are very bright. The installation was very easy and simple with your instructions. Here are a couple of pictures of the installed lights. The front of my 2007 Arctic Cat Prowler 650 XT has LED parking lights (centered) that I installed prior to purchasing and installing your turn signal kit. Thank you again for everything." (click on pictures to enlarge)
|
|
|
|
|
|
Gene from South Dakota wrote: "I have received and installed my turn signal kit. I had no trouble with the installation. This 2008 Arctic Cat Prowler has the tilt steering. I installed the rear signal lights on the ROPS cage. I mounted them high due to the fact the stop and tail light is at the top of the ROPS. I built two brackets for the front lights and mounted them at the bottom of the windshield to make them visible. I substituted a stainless steel hose clamp for the strap that came in the kit. I also bored a ½ inch hole in the dash and fed the main wiring harness through the dashboard. Hey, they work great!" (click on pictures to enlarge)
|
|
|
|
|
Kawasaki Mule Turn Signal Kits
|
|
|
Emmette from Texas wrote: “Cisco, here are some pictures of my 2008 Kawasaki Mule 600 with your LED Turn Signal Kit. Thanks for all your help!” (click on pictures to enlarge)
|
|
|
|
|
|
Henry from Bullhead City wrote: “Cisco, as promised here are a few pictures of our 2003 Kawasaki Mule with the front and rear turn signal lights, the turn signal switch, the LED flasher, the horn and the LED license plate bracket. Your instructions were very easy to read and follow, especially with the different color wirings. The EZTSK wire & connector kit general instructions were simple and everything is just working great.” (click on pictures to enlarge)
|
|
|
|
|
Kawasaki Teryx Turn Signal Kit
|
|
|
Roger from Prescott Valley wrote: “Your LED turn signal kit was just as advertised, of good quality and with easy to follow instructions. They work great and I would recommend your product to anyone interested in adding turn signals to their off-road vehicle. Thanks!” (click on pictures to enlarge)
|
|
|
|
|
Polaris Ranger Turn Signal Kits
|
|
Ken from Casa Grande wrote: "Thank you for such quick service in getting to me the LED Turn Signal Light Kit I ordered from you recently. I was very impressed with the quality of your product and how bright those LED Lights were mounted on my 2009 Ranger XP. The installation went as you suggested in your instructions. I decided on a different location for the mounting of the rear signal lights and placed them on the Ranger Roll Bar Head Rest Channel. They fit very nicely in the open channel and are protected from getting knocked off. Moreover, they look neat and like they belong there.
The Front Flare Brackets (FFB), for mounting the front signal lights, fit perfectly and adds to the beauty of the Ranger giving it a real OEM finished look. I recommend those to all 2009 Ranger XP and HD owners that want to add a bit more class to their Ranger. Also, share with your customers on how pleased I am with your LED Lights, the good service and the information you provided me with after the sale." (click on pictures to enlarge)
|
|
|
|
|
|
Herminio from Florida wrote: "Your lights work great, excellent fit into the 2009 Polaris Ranger XP. I am so impressed, I gave your name, phone number and e-mail address to the local POLARIS dealer."
|
|
|
|
|
Gary from Pinetop wrote: "I installed the LED turn signal kit on my 2008 Polaris Ranger XP Orange Crush and had a slight error. After talking with you for just a few minutes, you found I had the Pilot wire (blue) and Load wire (yellow) from the turn signal switch, crossed. Thanks for the great kit and especially the great support." (click on pictures to enlarge)
|
|
|
|
|
|
Craig from Michigan wrote: "I recently purchased your LED Turn Signal Kit for my 08 Ranger XP. What good quality! And easy installation! I feel safer already. Thank you for having such great products. I'm telling all my friends. Again, KUDOS!"
|
|
|
|
|
Vickie & Randy from West Virginia wrote: "We received the turn signals and have installed them. They are very nice and we really like them and now can not think about riding without them! Thanks for making such a good product." (click on pictures to enlarge)
|
|
|
|
|
Polaris Razor (RZR) Turn Signal Kits
|
|
|
Michael from Michigan wrote: "Thanks for getting the LED turn signal kit out so quickly... the install on my 2008 Polaris Razor went smooth." (click on pictures to enlarge)
|
|
|
|
|
Cheryl from Oklahoma wrote: “This near 60 year old lady, after looking at the website for pictures, connected the LED Electronic Flasher and completed the install. Be sure to add a color coded diagram to your instructions for the LED flasher, so feeble minded individuals out there, like me, things will go more smoothly. Remember, power connects to left blade, blue (pilot) connects to center top blade and yellow (load) connects to right blade. Ready now for tag office and street legal registration.”
Thank you Cheryl, we did add a color LED Electronic Flasher diagram to the instructions. You are an amazing women! (click on pictures to enlarge)
|
|
|
|
|
|
Roger from Arizona wrote: “Cisco, here are the pictures of my 2009 RZR with your LED Turn Signal & Parking Light Kit along with your LED Dome Lights installed. They work great and would highly recommend your products to any UTV owner! Thanks” (click on pictures to enlarge)
|
|
|
|
|
|
James from Utah wrote: “Cisco, the new SM LED Turn Signal Kit you sent me is looking and working great. I read through your instructions, then started the installation, and soon after the kit was installed. Those SM LED lights were so easy to install and I am so impressed with how bright they are. This Turn Signal Kit (stock# 104) not only looks good on my 2010 RZRS, I’ll bet it would look good on any UTV. Thank you for producing a great quality kit, Jim” (click on pictures to enlarge)
|
|
|
|
|
|
Don from Arizona wrote: “I ordered my SM LED Turn Signal Kit (stock# 104) with triple amber lights. I installed three lights in each corner to give my 2009 Polaris RZR a custom look. Here are a few pictures to show how they work.” (click on pictures to enlarge)
|
|
|
|
|
Yamaha Rhino Turn Signal Kits
|
|
|
Rod from Minnesota wrote: “Thanks for shipping the LED Parking Lights & Turn Signal Kit so quickly! Your kit really looks nice on my 2009 Yamaha Rhino.” (click on pictures to enlarge)
|
|
|
|
|
|
Robert from Michigan wrote: “I have attached some pictures of my installation for you to use on your site. I am very pleased with your kits! Good instructions, easy to follow, an excellent product. Thanks for a great product, Bob.” (click on pictures to enlarge)
|
|
|
|
|
|
Grover from Utah wrote: “It was a very easy kit to install, especially with me, I had surgery on my right shoulder so everything was done one handed. The installation turned out very good, especially when you follow the instructions. My "Ghetto Cruiser" ( that's what I've affectionately named my Yamaha) is a 2007 Rhino.” (click on pictures to enlarge)
|
|
|
|
|
Honda Big Red MUV Turn Signal Kit
|
|
|
Luke from Ohio wrote: “Here are some pictures of my 2009 Honda Big Red MUV with the Parking Lights & Turn Signal Kit (stock# 107) and the LED Lighted License Plate Bracket installed. I decided to build my own U-Bracket (instead of using a 5" inch hose clamp) for mounting the turn signal switch. Thank you for all your help.” (click on pictures to enlarge)
|
|
|
|
|
|
Frank from Michigan wrote: “I purchased your LED Turn Signal Kit (#105) and the Horn Kit (#310). After much thought I didn't see any way to attach the turn signal switch to the steering column, as you had told me over the phone. So, I fashioned a bracket similar to what Luke from Ohio did, which I felt turned out very well.” (click on pictures to enlarge)
|
|
|
|
|
|
Ken from Casa Grande wrote: "Cisco, thank you for your prompt shipping of the NEW LED Dome Light Kit. You provided good instructions that were easy to follow for my new 2009 Ranger XP. I appreciated that the kit had all the wiring connections and switch supplied with it. I like the soft white light and it illuminates the cab area very nicely. I would highly recommend your LED Dome Light Kit to future buyers of your Signal Light Kits and Cargo Light Kits."
|
|
|
|
LED Lighted License Plate Bracket
|
|
|
Scott from Arizona wrote: “Cisco here is a picture of your LED License Plate Bracket installed on my 2007 Yamaha Grizzly 700. Thank you for a great product and installation went well.” (click on picture to enlarge)
|
|
|
|
|
|
Mark from Arizona wrote: “Here is a picture of your LED License Plate Bracket installed on my 2008 Honda TRXX 700 ATV. The kit was easy to install and works great. If you would like to add (to your instructions) the wire colors for connecting the LED light they are green and brown.” (click on picture to enlarge)
|
|
|
|
|
|
Dan from Pennsylvania wrote: “I have a 2010 Ranger 800 XP and I just installed your horn kit. Everything works fine, I honestly think deciding where the button, horn, and fuse would go took about as long as the complete installation. Here are a couple of pictures to show what things look like. You will notice I mounted the button beside the speedometer display for easy reach. I used the nut and bolt on the bottom of the horn assembly to attach it to the cross bar above the batteries on the left side; so, I did not need the screw or mounting hardware. I installed the fuse lead wire into the key switch hot terminal and the fuse holder I cable tied to the bar using the existing holes. I use the Ranger at Good News Camp and I am very happy to have a horn on my vehicle because a horn is a safety necessity for the kids. I appreciate your great product and service. God bless, Dan.” (click on pictures to enlarge)
|
|
|
|
|
|
Robert from Michigan wrote: “I have attached some pictures of my installation for you to use on your site. I am very pleased with your kits! Good instructions, easy to follow, and excellent products. And as I told you before, the horn you use is made right here in our city. Thanks for a great product, Bob.” (click on pictures to enlarge)
|
|
|
|
|
|
Brian from Montana wrote: "I want to thank you for a great product. Not only is it made in the USA, but was so simple to plug and play. I'll check your website again. God Bless America!"
|
|
|
|
Gary from California wrote: "Just received and installed your horn kit. It is on my Sears garden tractor, for the benefit of the grandchildren and dog. Installs easily with your excellent directions and works perfectly."
(click on pictures to enlarge)
|
|
|
|
|
Yamaha Rhino Spare Tire Carrier / Holder
|
|
|
Jim from California wrote: "I looked for a spare tire carrier for several months. After finding yours on the website, I decided to order the Yamaha Rhino Spare Tire Carrier with the re-settable combination lock. I am very impressed, what a great tire carrier and security lock!" (click on pictures to enlarge)
|
|
|
|
|
|
Tom from Michigan wrote: "Here are two pictures of your (#107) LED Parking Lights and Turn Signal Kit installed on my golf cart. I really enjoy it, what a great addition." (click on pictures to enlarge)
|
|
|
|
|
|
Larry from Kansas wrote: "Here are some pictures of your LED Turn Signal Kit installed on my 2009 Land Pride Trekker. The kit was easy to install and the LED lights are very bright and visible. When we have to be on public roads to get from field to field the flasher feature is a real safety plus. These lights have been a very valuable addition to our vehicle. They really work great, thank you EZ Turn Signal Kits." (click on pictures to enlarge)
|
|
|
|
|
|
Larry from Canada wrote: "I installed your #104 – SM LED kit on my 2010 Panterra Wolf 700 UTV. I am very pleased with the results. After following the instructions to the letter, my lights lit up like Christmas trees the first try! It is reassuring to be able to signal my intentions to other motorists in a conventional manner." (click on pictures to enlarge)
|
|
|
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Phone: (623) 435-1337
Phone: (928) 369-2892
|
|
|
|
|
